2.1
MOUNTING
The LED fixture can be operated in any position at any angle. When mounted
on a flat surface, the surface must be strong enough to support 10 times the
weight of the fixture and stable so that there will be no damage caused to the
fixture or surrounding people or objects because of movements of the fixture
on the surface.
When the unit is mounted in a hanging position, the fixture is attached using the
mounting brackets and a standard truss clamp or other clamping device. The
mounting brackets supplied are mounted using quick-release locks allowing
simple mounting or removal.
CLAMP
SAFTY CABLE
BRACKET
2 INSTALLATION
IMPORTANT SAFETY NOTE!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
3.8
DEFAULT
Default
Default
No
Yes
MENU
Default
This functions will reset all setting to the original factory setting
ADVANCED
Connect all of the units in series using standard DMX512 signal cable .
Set the DMX512 address in the
DMX
menu.
It is possible to have the same DMX address or independent addresses for each
fixture.
4.2
CHANNEL ASSIGNMENT
4.1
BASIC ADDRESSING
Note: This product have two DMX512 channel configuration:
ADVANCED
and
BASIC
.
4 USING A DMX512 CONTROLLER
COLOR WHEEL
1
2
3
4
5
6
0
255
0
255
0
255
0
255
0
255
PAN
TILT
TILT FINE
PAN/TILT SPEED
0~54
0
PAN FINE
Fine control of pan movement
0~270
Fine control of tilt movement
From fast to slow
CHANNEL
FUNCTION
VALUE
NO
Green
Orange
Blue
Light Green
Yellow
Red
Rainbow or linear effect
Magenta