36
GENERAL NOTICE
This manual is intended for owners, installers, users and maintenance personnel of the AQUA series stoves and
is an integral part of the product. FONTANA FORNI SRL heating appliances are built and tested in accordance
with the safety requirements specified by the European directives.
Faulty stoves or mechanical and electrical
components are covered under a two-year
warranty. During the warranty, disassembling or replacement of the stove spare parts
must be carried out by your Service
Retailer. Unauthorized disassembling or replacements void the manufacturer's warranty. Any
damage due to improper use of the
stove will not be covered under warranty. The present manual contains instructions for the
following stove models: PELLET STOVE
AQUA 14.0
– 18.5
.
SYMBOLS
The following is a report of the symbols used in the manual. They draw the reader's attention to possible dangers during
installation and use
.
WARNING/DANGER: The texts marked by this symbol contain relevant safety information and
imply potentially dangerous situations or operations.
VOLTAGE: High voltage and danger of electricity shock.
GLOVES MANDATORY: This symbol means that gloves are compulsory for the operator in
order to avoid accidents.
WARNING: Hot surfaces
PURPOSE AND CONTENTS OF THIS MANUAL
The purpose of this manual is to provide the fundamental information for a correct installation, maintenance and use of the
product.
By delivering the present manual we decline any legal liability for accidents that may occur because the
user has not followed, or only partly followed, the instructions of the present manual.
INTENDED USE
AQUA
is a wood pellet stove for domestic use. Comply with the following instructions concerning the use of the stove:
Do not open the door when the stove is operating. The appliance is not intended for use by persons with limited
physical, sensory or mental capacities, or with insufficient experience or knowledge. The appliance is not intended
for use by children. Make sure children do not get close to the stove while it is operating. The above described
intended use of the stove and the relative configurations are the only ones permitted by the manufacturer: never
use the stove in ways not described in the provided instructions.
GENERAL INFORMATION
The identification label on the back of the stove (figure 1) contains all the relevant information to clearly and univocally identify
the manufacturer, the serial number and the EC marking. Extraordinary maintenance must be carried out by qualified personnel
authorized by the manufacturer. The manufacturer is not responsible for the consequences of improper installation,
therefore the
installer is fully responsible for the above mentioned non-complaint installation, unauthorized changes and/or
repairs and use of non-original spare parts.
The stove is to be used in compliance with the instructions contained in this
manual and safety
standards set by the specific local legislation where the stove is installed.
SAFETY STANDARDS
Directive 2006/95/EC:
"Electrical equipment designed for use within certain voltage limits.
Directive 2004/108/EC.
"Approximation of the laws of the Member States relating to electromagnetic compatibility".
Directive 89/391/EEC:
"Introduction of measures to encourage improvements in the safety and health of workers at
work".
Directive 89/106/EEC:
"Approximation of laws, regulations and administrative provisions of the Member States
relating to construction products".
Directive 85/374/EEC:
"Approximation of the laws, regulations and administrative provisions of the Member States
concerning liability for defective products".
Directive 1999/5/EC:
"Radio equipment and telecommunications terminal equipment and the mutual recognition of
their conformity".
UNI 14785/2006:
"Residential space heating appliances fired by wood pellets - Requirements and test methods". EN
60335-1. EN 50165. EN 50366. EN 55014-1. EN 61000-3-2. EN 14785. EN 61591. EN 60704-3. EN 60704-2