Warranty
The product warranty is pursuant to the Danish Sale of Goods Act.The warranty period starts on the day
the product was purchased.
Warranty handling
A defective product must be returned to the place of purchase along with a valid receipt. If the product be
-
comes defective during the warranty period, the product must be returned to the place of purchase.
Warranty disclaimer
Damage or defects resulting from neglect or improper use of the product is not covered by the warranty.
The warranty does not cover force majeure such as lightning, flood, fire or damage occurred during trans
-
port. Warranty cover will be void, if the product’s serial number has been changed, if any modifications
have been made or if a repair has been attempted by any unauthorized service centre.
5
OPERATING INSTTRUCTIONS
Install the heater as shown on page 12 in the manual.
1.
Connect the heater to a 230V ~ 50Hz power outlet.
2.
Press the button I (fig. 1), the heater will be ready mode.
3.
Press the button O (fig. 1), the heater will be off.
4.
Touch the touch switch one time, the heater will be on 900W.
5.
Touch the touch switch two times, the heater will be on 1200W.
6.
Touch the touch switch three times, the heater will be on 2100W.
7.
Touch the touch switch four times to turn off the heater.
8.
Product Overview
A. Decoration Cover B .Heater Head
C. Heating lamp D. Switch Box
E.Top tube F. Middle tube
G.Bottom tube H. Base
I. Power Cable
Warning: Please tear off all the hyaline protect
film around the
big Decoration Cover
first!
Assembling Process
Step 1: Connect the bottom tube
with
base
by screwing them
together.
Step 2
: Feed the Power Cord through the Base and the Bottom
tube,
and pull through around 2m of cable.
Step 3: Connect the base tube, middle tube and bottom tube
by screwing
Product Overview
A. Decoration Cover B .Heater Head
C. Heating lamp D. Switch Box
E.Top tube F. Middle tube
G.Bottom tube H. Base
I. Power Cable
Warning: Please tear off all the hyaline protect
film around the
big Decoration Cover
first!
Assembling Process
Step 1: Connect the bottom tube
with
base
by screwing them
together.
Step 2
: Feed the Power Cord through the Base and the Bottom
tube,
and pull through around 2m of cable.
Step 3: Connect the base tube, middle tube and bottom tube
by screwing
A. Decoration cover B. Heater head
C. Heating lamp
D. Switchbox
E. Top tube
F. Middle tube
G. Bottom tube
H. Base
I. Power cable
Warning!
Please tear off all the hyaline
protect film around the big
decoration cover first!
Model no.
ZHQ1821SH-BC-HS
Art. No.
211-377
Power source
230V AC ~ 50 Hz
Consumption
900/1200/2100W
Protection class
IP44
Product specifications
Fig. 1
ON/OFF
TOUCH BUTTON
