Warranty
The product warranty is pursuant to the Danish Sale of Goods Act.The warranty period starts on the day
the product was purchased.
Warranty handling
A defective product must be returned to the place of purchase along with a valid receipt. If the product
becomes defective during the warranty period, the product must be returned to the place of purchase.
Warranty disclaimer
Damage or defects resulting from neglect or improper use of the product is not covered by the warranty.
The warranty does not cover force majeure such as lightning, flood, fire or damage occurred during
transport. Warranty cover will be void, if the product’s serial number has been changed, if any modifications
have been made or if a repair has been attempted by any unauthorized service centre.
OPERATING INSTRUCTIONS
Mount a hook in the ceiling where you want to place the patio heater.
1.
The hook in the ceiling shall withstand a weight of 3-4 times the weight of the patio heater.
2.
Install the heater as shown on page 12.
3.
Observe the distance to the ceiling, floor and wall as indicated above.
4.
Connect the heater to a 230V ~ 50Hz power outlet.
5.
Press the ON/OFF button activate the heater.
6.
Operation using the remote control
To turn ON/OFF the heater press the left button on the remote control.
•
To turn ON/OFF the LED light, press the right button on the remote control.
•
Operation Using the TOUCH button
Press the button once to turn on the heater.
•
Press the button twice to turn on the LED light.
•
Press the button three times to turn on both the heater and LED light.
•
Press the button four times to switch off the heater and LED light.
•
Only use the heater in hanging position.
7.
5
Model no.
ZHQ2068-RMLED
Art. No.
211-315
Power source
220-240V AC ~ 50 Hz
Consumption
2000W
Protection class
IP45
Product specifications
5
Minimum Required Distances:
•
25cm from the side wall
•
50cm from the ceiling
•
Installation height above 180cm
OPERATING INSTRUCTIONS
WANRING: The heater must be properly installed before it is used
This unit is equipped with one heat setting
On
I
Off.
Plug the Patio Heater into a grounded 220-240V 50-
60Hz power
outlet.
Only operate the heater when it is in t
he upright position.
The ON
-
OFF switch on the heater is used to control the power of
the heater.
Press on the On/Off switch to activate the heater
Remote control
A.
To operate the heater on power (
20
00W), press on the left side
button of the remote control
B.
To
operate the LED light, press on the right side button of the
remote control
Touch switch
A.
Press the touch switch one time to operate the heater on power
(
20
00W)
.
B.
Press the touch switch twice to
operate the LED light.
C.
Press the touch switch three times to o
perate
the heater on power
(
20
00W)
and LED light.
D.
Press the touch switch four times to off the heater power and LED
light.
The main power switch must be turned on to operate the heater.
MAINTENANCE
Unplug the unit and let it cool completely.
�
To keep the
heater clean, the outer shell may be cleaned with a
soft, damp cloth. You may use a mild detergent if necessary. After
cleaning, dry the unit with a soft cloth.
�
DO NOT use alcohol, gasoline, abrasive powders, furniture polish,
or rough brushes to clean th
e heater. This may cause damage or
deterioration to the surface of the heater.
�
Although this heater is outdoor approved, DO NOT immerse the
heater in water for your safety.
�
The light source of this luminaire is not replaceable; when the
light source reache
s its end of life the whole luminaire shall be
Floor
Ceiling
W
all
Installation
Remote control
