Step 5: When finish using the heater, please
a) Right hand push up the heater
b) Left hand press the little silver knob to the end
c) Right hand push down the heater.
Operation
Connect the power cable to a 13 ampere supply that is located
in a safe,
dry area.
The switch on the heater head is used to control the three
heat settings. (I) for 650W – (II) for 1300W – (I&II) for
2000W. The 0 position is off.
Although the patio heater is shower proof, do not use when
raining or in wet conditions.
Always disconnect the power cable from the electrical
supply, when the patio heater is not in use.
Care and maintenance
•
When disconnected from the electrical supply, clean the
outside of the patio heater with a damp cloth. Never use
corrosive or solvent cleaners or immerse in water.
•
Any maintenance or repairs including replacing the
halogen tube should only be carried out by a qualified
electrician or by a recommended service center.
STORAGE
If the heater will not be used for a long period of time, store it in
a cool, dry location when not in use. To prevent dust and dirt
build-up, use the original packaging to repack the unit.
TROUBLE SHOOTING
If the heater will not operate, please check the following before
seeking repair of service:
Check if the power cord is plugged into an electrical outlet, if not
plug in.
Check if electricity to the main fuse is working.
Make certain the power switches are turned on. If not, choose a
setting.
Technical Specification
•
Power supply 220-240V~ 50
-60
Hz
•
Wattage max 2000W
•
Insulation class I
GB
