SAFETY INFORMATION
Please read this important safety information before you use the device. It contains general
safety information. Follow the warning and caution information to prevent injury to yourself or
others and to prevent damage to your device.
Eye Exposure:
1.
Injury may occur if eyes are subjected to prolonged direct exposure to bright light.
Wear approved eye protection
for protection from UV rays, and appropriate certifi-
cation compliances for LED lighting.
2. Do not use lamps in applications where humans and/or animals will be subjected
to direct long-term uncomfortable visual exposure to light emissions as this could
result in eye injury. If lamp appears damaged, remove power and then repair or
request replacement the product.
Burn Warning:
1.
Operating lamps may become hot and may involve some risk or causing fire or
serious bodily injury or other damages. Use of temperature resistant gloves is
recommended.
*Always allow sufficient time for product to cool prior to touching.
Electrical Hazard:
1.
Electrical shock hazard is always associated with the use of electrical appliances
and working with electricity. Do not use if cords or plugs are damaged or with loose
electrical sockets. Unsecured connections can cause electrical shock or fire. Do not
touch the power cord with wet hands or disconnect from power source by pulling on
the cord, as doing so may result in electrical shock. Do not bend or damage the pow-
er cord or unit wiring, as doing so may cause electrical shock or fire. User holds sole
liability and responsibility for proper use, handling and installation of this product.
2. When performing any troubleshooting please disconnect the AC power and wait 30
seconds for power supply to de-energize. It is also important to follow this step be-
fore any inspection, adjustment or maintenance to lamps.
Environment:
1.
All disposal options should be evaluated with respect to federal, state, and local re-
quirements. Before disposing of waste lamps and components, check with federal,
state, and/or local officials for current guidelines and regulations.
Caution
Failure to comply with safety cautions and regulations can cause injury or property damage.
•
Care and use your device properly. Do not use the device for anything other than its
intended use.
•
Damages or poor performance caused by failure to follow warnings and instruc-
tions can void your manufacturer’s warranty.
•
Damages or poor performance caused by failure to follow warnings and instruc-
tions can void your manufacturer’s warranty.
Disclaimer:
Buyer accepts responsibility for any and all grow lamps and components and any product
operation that may lead to personal injury, economic loss, social distress, death or other
losses including costs and damages. Horticulture Lighting Group is not responsible for
misuse of any of their products. The purchaser is solely responsible for compliance with all
applicable laws and regulations concerning the use of Horticulture Lighting Group products.
The information contained in this manual herein is presented in good faith and believed to be
correct. No representations are made as to the completeness or accuracy thereof. Neither
Preparer nor Company assumes any liability or responsibility for its use.
SAFETY HLG: 02/20/2020
5
6
PACKAGE INCLUDES
•
HLG 550 B Spec Light
•
Hanging hardware
•
Rope Ratchets
HLG 550 B Spec Light
Rope Ratchets
Hanging hardware
Achieve higher intensity and increase even coverage in a grow tent,
reflective area, or cross-over by using multiple HLG 550 V2 lamps.