Horticat U80PRO, User Manual

Page: 9 / 16

-
8
-
The Leader of Ultrasonic Misting
Technology
B. Connecting the Humidistat
Plug in the supplied humidistat into the rj45 port next to the water inlet on the bottom
of the unit. The humidistat is tucked into the foam in the box for shipping purposes, this
humidistat can be extended by an rj45 extension to be hung anywhere you desire for a
better relative humidity reading. The humidifier will not work if the humidistat is not
plugged in or will go to sub mode and use the master unit settings if connected wirelessly
in the room.
C. Water Input
Thread the supplied ½
” threaded to ¼” push fitting adapter to the water inlet port on
the bottom of the unit. Be sure to use the supplied rubber washer and be careful not to
over tighten and damage the unit.
You may alter your layout / connections / fittings to customize to your needs. The
only required connection is the water supply in and a shut off fitting on the drain outlet. We
suggest running this unit on a RO water system and/or with the use of an inline filter and
supplied water is under 200ppm. Without any pre-filter you may get calcium and other
mineral deposits built up in the unit and surrounding area. The most common connection
is to your buildings water supply lines with the use of the included ¼” saddle valve. We
have included in the box a step by step installation sheet for the saddle valve installation,
if
you don’t feel comfortable with installing it please contact a local plumber.