INSTALLATION
Please check all the items against the parts list after opening the box. Only all the items are
complete, the installation could be followed.
Step 1
Step 2
Step 3
Step 4
Step 5
Top Middle 2x
Down
Step1
：
Fix down pole on base by clockwise rotation, then feed the
cable from base to pole.
Step2
：
Rotate 2 middle poles clockwise into down pole, then
connect top pole by same way. Run the cable though all the poles.
Step3: Connect the plug on the heater head to the power cable
plug. Install the clip as illustration.
Step4: Push the heater head onto the pole, aligning the holes on
the heater head and the tube. Once aligned, fix in position using 2
screws.
Stop5: Fix power cable to the base by unscrewing the 4 screw
from plastic fittings. Secure the cable by screwing 4 screw.
Operation
“ ” for 1500W
“ ” heater OFF
CLEANING AND MAINTENANCE
1) Always turn off and unplug the heater before cleaning.
2) To clean the heater, use a damp cloth and make sure to dry excess water once cleaned.
*ATTENTION
Do not put the heater directly into any container with water in it.
