Programme Override Facilities
With the CentaurPlus C21 programmer operating in the normal running mode it is possible
to alter the functionality of the programme on each individual channel by means of the
CH and HW buttons.
The options include;
aUTO
-
Channel follows all programmed ‘ON’ and ‘OFF’ times.
aLL day
- Channel operates from 1st ‘ON’ time until 3rd ’OFF’, ignoring all
switching times in between.
24hrs
-
Channel will be constantly ‘ON’.
OFF
-
Channel will be constantly ‘OFF’, there is the ability to turn off the
heating during the summer without altering the programme times.
On the hot water channel the boost is still available. As both channels
are totally independent it is possible to have them set differently if
necessary.
All of the settings above will be permanent, i.e. unaffected by programme times, until
alteration by the user.
The diagram below illustrates how to alter the setting, it assumes that the channel is in the
AUTO mode to begin with.
Press HW or
CH once.
Programme
goes from
aUTO to
aLL day
Programme
will operate
from 1st ON
until 3rd OFF
period
Press HW or
CH again.
Programme
goes from
aLL day to
24 HrS
Programme
will be
continuously
ON
Press HW or
CH again.
Programme
goes from
24 HrS to OFF
Programme
will be
continuously
OFF
Press HW or
CH again.
Programme
goes from
OFF to aUTO
Programme
will return
to normal
ON and OFF
times
4
AUTO
ALL DAY
24 HRS
OFF
6:35
PM
HW CH
HW CH
HW CH
HW CH
AUTO
ALL DAY
24 HRS
OFF
6:35
PM
AUTO
ALL DAY
24 HRS
OFF
6:35
PM
AUTO
ALL DAY
24 HRS
OFF
6:35
PM
