Horst Welding CHCF30 Operator'S Manual Download Page 11

Page: 11 / 44

Safety Labels

Safety labeling is an important part of the overall safe use of the implement. Safety labeling alerts and warns against

potential injury or death, and is important to follow these points to help keep your implement safe for you and others who

may be using it.

If labels need to be replaced:

• Be sure that the installation area is clean and dry.

• Be sure temperature is above 50°F (10°C).

• Determine exact position before you remove the backing paper.

• Remove the smallest portion of the split backing paper.

•

Align the sign over the specified area and carefully press the small portion with the exposed sticky backing in place.

• Slowly peel back the remaining paper and carefully smooth the remaining portion of the sign in place.

• Small air pockets can be pierced with a pin and smoothed out using the piece of sign backing paper.

Safety Label Descriptions

• Keep safety signs clean and legible at all times.
• Replace safety signs that are missing or have become

illegible.

• Replaced parts that displayed a safety sign should

also display the current sign.

• Safety signs in Section 3 each have a part number

displayed with it. Use this part number when ordering

replacement parts.

• Safety signs are available from your authorized

Distributor or the factory order desk.

SL00001

SL00002

SL00003

SL00004

SL00005

SL00006

SNL00001

Caution: read and understand ALL safety and

operating instructions in the manual, read and

understand ALL safety labels located on the

machine. The most important safety device on

this equipment is an informed SAFE operator.

Caution: Accidental wagon disconnection on

a public road could result in death or serious

injury and/or implement damage. Before

transport on public roads always have the

safety chain attached, and a 3/4” grade 5 hitch

pin is installed.

Caution: an unsecured load may fall from the

wagon and could result in death or serious injury

and/or implement damage. Before transport on

public roads always check the ratchet straps

are tight and in locked position.

Caution: Do not stand under or directly in front

of the top rail while it is being adjusted, potential

collision exists if the rail drops suddenly and

could result in death or serious injury.

Caution: Moving parts present a potential pinch

hazard and could result in a serious injury. Use

caution and be aware of parts as they are being

moved or adjusted.

Caution: Loading the header on the wagon

presents a potential pinch hazard and could

result in a serious injury. Use caution and be

aware as the header is loaded on potential

pinch points on the header pads and the top

rail.

Caution: Personal Protection Equipment (PPE)

is required when operating or maintaining this

machine. Failure to wear PPE will result in

personal injury.

Slow-moving vehicle (

SMV) sign warns other

road users that the wagon displaying the sign

is traveling at maximum road speed of 40 km/h

(25 mile/h) or less. Ensure the sign is in place

whenever transporting on a public road.

Yellow Retro-reflective label required for

marking of implements for length / width.

Red Retro-reflective label required for

marking of implements for length: rear view.

km/h

mile/h

MAXIMUM

IL00007

Caution: Wagon components are rated at 50

km/h (30 mile/h) maximum speed. Potential for

injury and damage if traveling above maximum

travel speed rating.

SNL00002

Caution: Block or chock the wheels. Loading

or unloading the wagon presents a potential

unintentional movement hazard. Chock wheels

when loading or unloading or storing the wagon.

Summary of Contents for CHCF30













































Search results

Summary of Contents for CHCF30

Reviews:

Related manuals for CHCF30

Brands by name

Popular brands

Horst Welding CHCF30, Operator'S Manual

Search results

Summary of Contents for CHCF30

Reviews:

Related manuals for CHCF30

Brands by name

Popular brands