horsch Taro 6 SL, Operating Instructions Manual

Page: 35 / 70

60026505 • 1 • 09/2020 • en 35
7 Operation
WARNING
Ø
Whenever working on the machine pay attention to the associated safety
notes in the chapter "Safety and Introduction" as well as the accident preven-
tion regulations!
7.1 Commissioning / Tractor change
During initial commissioning and when changing the tractor, the machine must be
adapted to the tractor.
WARNING
Dropping or lowering machine parts can cause severe crushing injuries etc.!
Ø
Instruct persons to leave the danger zone.
Ø
Comply with the accident prevention instructions.
The machine is available with various row spacing.
To position the machine centred behind the tractor, sleeves of a certain length must
be pushed on the bolts of the tractor link arms. In addition, there are two ways of
fastening the upper link on the machine.
A B
D C
Taro SL connection – front view (example: 250 m
m
row spacing)
Ø Always insert the sleeves on the outside.