1
Changing implements
Secure the machine against unintended roll-
ing!
Secure lifted frame parts, under which you will
be working, with suitable supports!
Caution! Danger of injury caused by protrud-
ing parts (harrow, tines, share)!
Do not use packer tyres or other rotating parts
when climbing onto the machine. These could
start to rotate and you could fall and be seri-
ously injured.
During operation
Check the area around the machine (for chil-
dren!) before setting off and starting operation
of the machine. Ensure sufficient visibility.
Do not remove any of the mandatory and
supplied protective devices.
Stay clear of the operating range of hydrauli-
cally operated parts.
Only use ascending aids and steps when
machine is at standstill. Passengers are not
allowed to ride on the machine during opera-
tion!
Service and maintenance
Ensure that regular tests and inspections are
always carried out to schedule, as specified
in the operating instructions.
Prior to performing maintenance and servicing
work, ensure that the machine is positioned
on firm, level ground and that it is properly
secured against rolling away.
De-pressurise the hydraulic system and lower
or support the implement.
Before cleaning the machine with high pres-
sure cleaning equipment cover all openings,
which should stay clear of water, steam or
cleaning agents for reasons of safety or op-
eration. Do not aim the water jet directly at
electrical or electronic components, bearings
or the fan.
After cleaning, check all hydraulic lines for
leaks and loose connections.
Check hoses for chafing and signs of other
damage. Remedy any faults immediately!
Prior to working on the electrical system, dis-
connect it from the electric power supply.
When performing welding work on the seed
wagon, disconnect the cables from computers
and other electronic components. The ground
connection must be as close as possible to
the welding point.
Retighten screwed connections which had
been loosened during servicing and mainte-
nance work.
Do not wash new machines with a
steam-jet or high-pressure cleaner. The
paint takes approx. 3 months to cure
and could thus be damaged if this time
has not yet expired.
The control units on the tractor must
be secured or locked when not in use
or when the machine is in transport
position, in order to prevent accidents
caused by unintended hydraulic move-
ments or movements caused by per-
sons other than the operator (children,
passengers).
