horsch Pronto 3 - 6 DC Operating Instructions Manual Download

Page: 40 / 129

Instruction stickers

Clean soiled stickers.

Damaged or illegible stickers must be re-

placed immediately.

Apply the specified stickers to spare parts.

Loading hook;

hook the load suspension gear (chains, ropes

etc.) into this loading hook during loading.

Loading work only by operators trained by

HORSCH!

Jack lifting point;

area where the jack must be attached for

the wheel change.

00385757

Lashing points;

Hook fastening gear (lashing belts, chains,

etc.) here.

Loading work only by operators trained by

HORSCH!

00385757

60010418

Always plug in all hydraulic lines. Otherwise

components could be damaged because of

interconnected hydraulic functions.

Note on fan speed and folding pressure

Pronto 3 and 4 DC.

Attach the scales here when calibrating.

Summary of Contents for Pronto 3 - 6 DC


































































































































Search results

Summary of Contents for Pronto 3 - 6 DC

Reviews:

Related manuals for Pronto 3 - 6 DC

Brands by name

Popular brands

horsch Pronto 3 - 6 DC, Operating Instructions Manual

Search results

Summary of Contents for Pronto 3 - 6 DC

Reviews:

Related manuals for Pronto 3 - 6 DC

Brands by name

Popular brands