horsch Maestro RC Central Fill 1230, Owner'S Manual

Page: 12 / 108

12 Maestro RC Owner’s Manual – Ver. 2.1 10/2019
www.horsch.com
Introduction & Guidelines
Safety is
YOUR
responsibility! See Section 2 – Safety for further information.
READ AND UNDERSTAND THIS MANUAL BEFORE YOU OPERATE THIS MACHINE
Learn how to operate and service your machine correctly. Failure to do so could result in personal injury
and/or equipment and property damage. HORSCH will not accept any responsibility, or assume liability,
for any damage or malfunctions resulting from failure to comply with the safe operating instructions
outlined in this Owner’s Manual.
If the information found in this manual is not completely understood or if there are any questions, contact
HORSCH
Customer Service.
HORSCH cares about your safety! This machine is designed to provide maximum possible safety; but
no machine design can prevent operator error or carelessness.
The Owner’s Manual provides instructions for the safe operation and maintenance of this machine.
Make sure the machine is in good operating condition.
Check service schedule in book.
This manual should be considered a permanent part of your machine and should remain with the machine
if you no longer own it. Right hand and left hand are determined by facing the direction of forward travel
respectively.
HORSCH
reserves the right to alter illustrations as well as technical data and weights contained in this
manual at any time without notice.
This data is the property of
HORSCH
. All use and/or reproduction not specifically authorized by
HORSCH
are prohibited.
All information, illustrations and specifications in this manual are based on the latest information available
at the time of publication. The right is reserved to make changes at any time without notice.
Some illustrations may show optional equipment. Illustrations may show shields, guards, etc., opened or
removed. All shields, guards, etc. must be in place during operation.
Machine Registration
(Important Notice to Dealer/Owner!)
Please complete the Machine Registration Form on the next few pages and return to
HORSCH
within 10
(ten) business days, from date of delivery to owner. Accurately record all the numbers to help in tracing
the machine. Your dealer needs these numbers when you order parts. NO WARRANTY CLAIMS WILL
BE ACCEPTED IF THIS MACHINE REGISTRATION IS NOT RETURNED. The warranty period begins
on the date of delivery. See further noted information in the Warranty Guidelines section on the following
pages.