horsch LEEB PT 330, Operating Instructions Manual

Page: 74 / 203

4.11 Control terminal
Spraying operation is controlled via the terminal
in the cabin.
The graphic user interface shows and controls
current settings and measuring values in spray-
ing operation:
•
Input and monitoring of data in spraying op-
eration
The self-propelled crop protection sprayer is
equipped with an ISOBUS compatible terminal
"Topcon X30" as standard.
Other ISOBUS compatible terminals may alter-
natively also be used. However, this should be
discussed with the HORSCH- LEEB Service
before use.
NOTE
When using an alternative terminal the respective
operating instructions issued by the manufacturer
must be followed!
A detailed description can be found in the oper-
ating instructions for the control terminal!
Instructions for operating the sprayer software
can be found in the supplied brief instructions
from HORSCH!
Description
Engine oil level low
Engine oil level too low / value invalid
Engine oil limit fallen below
Hydraulics filling level critical
Engine oil pressure low / too low
Engine oil pressure outside of range
Steering: Front axle pressure faulty
Suspension: Pressure too high
Malfunction front left suspension
safety valve
Folding boom not retracted
Service brake accumulator charge
pressure too low
Description
alarm
several warnings / faults
several alarms
Information
74