horsch LEEB PT 330, Operating Instructions Manual

Page: 36 / 203

2.2 Securing against
unintended starting
WARNING
Danger of crushing, shearing, cutting, cut-
ting off, being caught, wound up, pulled in
and impact when working on the machine
caused by
¾
accidental lowering of lifted, unsecured
machine parts!
¾
accidental starting and unintended rolling
of the machine!
Secure the vehicle against accidental starting
and unintended rolling before starting work on
the machine.
All interventions on the machine, such as (e.g.
assembly work, adjustments, rectification of
faults, cleaning, maintenance and repair) are
prohibited,
¾
while the machine is driven.
¾
as long as the Trac is not secured with parking
brake and/or wheel chocks against accidental
rolling.
¾
if moveable parts have not been blocked to
prevent unintended movement.
2.1 Check suitability of the
vehicle
WARNING
Risk of accident through
¾
caused by unintended use of the machine!
¾
insufficient stability!
¾
insufficient steering and braking ability!
Prerequisites for the suitability of the machine
are in particular:
¾
optimal functioning of the brake (brake test)
¾
compliance with the permissible total weight
¾
the tyre load bearing capacity
Further data can be found on the type plate or
in the vehicle identification card.
Calculating the actual values for total weight,
axle loads and tyre bearing capacities as well
as the required minimum ballasting
NOTE
The permissible total weight of the Trac, as
specified in the vehicle identification card, must
be higher than the total of Trac curb weight and
total weight.
36