Changing the AutoLine working
mode
Two working modes are available when TRAM-
LINE Management is activated:
•
Automatic mode (AutoLine)
The system creates the tram lines automat-
ically.
•
Manual mode
Creating a tram line is controlled via the work-
ing signal of the drill.
Softkey for switching between auto-
matic mode and manual mode.
The terminal shows which mode is activated:
Symbol
Meaning
Automatic mode activated.
Manual mode activated.
AutoLine cannot be activated since no lead
tracks were created.
Move tram lines to another pass
When creating tram lines in automatic mode,
they are transferred to the machine by AutoLine.
¾
Adjust the current number of pass manually
if it does not correspond to the desired pass.
The numbers and colour displays are adjusted
here accordingly in the terminal.
Symbol
Meaning
Increasing the current number of the pass.
Reducing the current number of the pass.
NOTE
¾
Move the tram lines only
before
starting to
work!
Moving the tram lines while drilling destroys the
rhythm and makes the tram lines created unusable
for further work with other machines.
NOTE
Faulty tram line with wrong direction of travel!
When entering the field opposite the stipulated
direction of travel of the tram line rhythm, the
tram lines are not created correctly.
•
The direction is shown when the tram lines
are arranged asymmetrically.
•
No direction is shown when the tram lines are
arranged symmetrically.
¾
Always pay attention to the stipulated direc-
tion of travel of the tram line rhythm!
10
11
