© 2005 Directed Electronics, Vista, CA—all rights reserved
2
25
5
ttrraannssm
miitttteerr//rreecceeiivveerr lleeaarrnn rroouuttiinnee
The system comes with two transmitters that have been taught to the receiver. Use the following learn routine to
add transmitters to the system or to change button assignments if desired.
The Valet/Program switch, plugged into the blue port, is used for programming. There is a basic sequence to
remember whenever programming this unit: Door, Key, Choose, Transmit and Release.
1.
O
Op
peen
n aa d
do
oo
orr.. (The GREEN wire, H1/8, or the VIOLET, H1/6 must be connected.)
2.
K
Keeyy.. Turn the ignition on. (The H1/4 YELLOW switched ignition input must be connected.)
3.
CCh
ho
oo
ossee.. Press and release the Valet/Program switch the number of times necessary to
access the desired channel, then press the switch once more and Hold it. The siren will
chirp and the LED will blink the number of times corresponding to the channel that has
been accessed.
CCH
HA
AN
NN
NEELL
P
PR
REESSSS A
AN
ND
D R
REELLEEA
ASSEE
N
NU
UM
MB
BEER
R
TTH
HEE V
VA
ALLEETT//P
PR
RO
OG
GR
RA
AM
M SSW
WIITTCCH
H
TTO
O P
PR
RO
OG
GR
RA
AM
M FFU
UN
NCCTTIIO
ON
N
1
One Time
Arm/Disarm/Panic
2
Two Times
Channel 2
3
Three Times
Channel 3
4
Four Times
Channel 4
5
Five Times
Arm Only
6
Six Times
Disarm Only
7
Seven Times
Panic Only
8
Eight Times
Auto-learn* (4-button and LCD 2-way transmitters)
9
Nine Times
Auto-Learn* (3-button optional transmitter)
10
Ten Times
Delete all Transmitters**
*
*N
NO
OTTEE:: See Transmitter Configuration section of this guide for a description of Auto-learn
transmitter programming.
*
**
*N
NO
OTTEE:: If any button from a known transmitter is programmed to Channel 10, all transmit-
ters will be erased from memory and the system will revert to the default feature settings.
(See Features Menu section of this guide.)
