1 PRODUCT
DESCRIPTION
For detailed installation, configuration and other information, refer to the hardware manual of the
controller you are using. See the
Additional References
section in this document.
The
FOX100
allows an OCS/RCS to connect up to five Fiber Optic Expansion bases and hubs (i.e.,
FOX104 and FOX404).
Note:
The FOX100 is designed for use only with the following OCS/ RCS controllers: OCS110 /
OCS210 / Graphic OCS250, and RCS250.
2 FOX
SPECIFICATIONS
Table 1 –
FOX100 Hub and Base Specifications
Maximum number of stacks (total
number of hubs and bases)
5
Maximum number of cable drops to
any specific hub or base
3 (See Section Five for Example Setups.)
Maximum length of Fiber Optic cable
10 Meters per Drop
Base ID#
Each Base or Hub must have a unique Base ID #.
Expansion I/O
EIAJ RC-5720 Plastic Fiber, TX+RX 10m per drop max host (OCS or
hub) to base
Type of Fiber Optic Cable
EIAJ RC-5720 (RC)
Primary Power
9-30VDC @ 400mA maximum
Power Draw
9-30VDC @ 400mA maximum
Height
4.25” (108 mm)
Width
6.63” (168.3 mm)
Mounting Depth
4.7” (119.4 mm)
Operating Temperature
32 - 122
°
F (0 - 50
°
C)
Humidity
5% to 95% non-condensing
08 June 2005
MAN0509-03
Fiber Optic Expansion Module
(HE800FOX100)
Products Specifications
and Installation Data
