MAN1032-10-EN_EXL6_UserManual
March 12, 2020
147 | 191
CHAPTER 17: REMOVABLE MEDIA
17.1 Overview
All EXL6 OCS models provide a Removable Media slot, labeled Memory Card, which supports
standard microSD Flash memory cards. MicroSD cards can be used to save and load
applications, to capture graphics screens and to log data for later retrieval.
Figure 17.1
–
Removable microSD Memory Card Slot
17.2 Removable microSD Cards
When the microSD card format was introduced, it was originally called TransFlash. Cards labeled
either microSD or TransFlash, with up to 32GB of Flash memory, are compatible with the EXL6
OCS memory card slot (larger sizes were not tested at time of publication).
The memory card slot is
equipped with a “push
-in, push-
out” connector and a
microSD card can
be safely inserted into the Memory slot whether the EXL6 OCS power is On or Off.
To install a microSD card:
Align its 8-pin gold edge connector down, facing the front of the EXL6
OCS unit; then carefully push it all the way into the Memory slot. Ensure that it clicks into place.
To remove the microSD card
: Push in on the top of the card gently to release the spring. The
card pops out for removal.
