LMAN0075-01-EN
HLB Supplement Installation Guide
03/26/21
Page 2
Step 5. Carefully place dome lens on
top of fixture, making sure lens is
centered and laying flat
Step 6. Replace outer plate over
dome lens, matching up holes with
holes on fixture underneath.
Step 7. If also using the dome guard, replace 4 pcs M4*16 screws, leaving
one hole empty between each one. Tighten to 1.47 � lb.
If not using the
dome guard, replace all 8 pcs M4*16 screws. Tighten to 1.47 � lb.
Step 8. If using dome guard, carefully
place over dome lens, lining up ends
with ‘loops’ over the 4 empty screw
holes.
Step 9. Using the remaining 4 pcs M4*16 screws, 4 pcs small locking washers
and 4 pcs larger washers (as shown), secure dome guard by �ghtening screws
into 4 remaining holes. Tighten to 1.47 � lb.
Dome guard
