RAMBO INSTRUCTION BOOKLET
10
Battery Safety
•
Only connect the battery clips to a 12 volt DC power supply.
•
Don’t use a battery that looks damaged or is leaking.
•
Don’t use a machine with damaged battery leads.
• Don’t smoke or allow naked flames anywhere near the battery.
•
Don’t let any metal objects come in contact with the battery as
these could cause a spark and possibly make the battery explode.
•
Don’t remove the power leads while the machine is running.
To connect your machine to a battery
1.
Make sure your machine is switched off.
2.
Connect the black lead to the negative (-) terminal on the battery.
3.
Connect the red lead to the positive (+) terminal on the battery.
To disconnect your machine from the battery
1.
Make sure your machine is switched off.
2.
Remove the red lead from the positive (+) terminal on the battery.
3.
Remove the black lead from negative (-) terminal on the battery.
Running the machine directly from a vehicle
•
If you are using the machine connected to a vehicle it is
advisable to start the vehicle every 2/3 hours for approximately
15 minutes to top up the battery.
•
There is no need to disconnect the battery from the vehicle
when using the machine.
•
The vehicle does not need to be running whilst using the
machine.
RAMBO VEHICLE
