HORNER APG HE-XW1E0, User Manual

Page: 55 / 195

MAN0974-11-EN_XL7_UserManual
March 22
nd
, 2020 Page 55 | 195
Table 6.3 – %SR Registers – Master %SR Table
Register
Default I/O
Name
Description
Min-Max
Values
Program
(Read/Write)
Display
(Read/Write)
*RCC Units Only
%SR164.15
Set to 1 for manual restore of data.
Set to 0 to complete the restore
operation.
*RCC Units Only
Read / Write Read / Write
%SR165-166 Reserved
%SR167
Screen Update Time, Default= 5
*X4 & X7 Only
– Default = 10
2 to 50 Read/Write Read/Write
%SR168-170 Reserved
%SR171 X-Coordinate Touched Read Only Read Only
%SR172 Y-Coordinate Touched Read Only Read Only
%SR173 System-Function Disable, 0 to 1 Read / Write Read / Write
%SR174 Removable Media Protect Read/Write Read/Write
%SR174.1 Request Media Card be Removed Read / Write Read / Write
%SR174.2 Indicates safe to remove Media Read / Write Read / Write
%SR175 Removable Media - Status Read Only Read Only
%SR176-177
Removable Media Free Space (32-Bit
DINT)
Read Only Read Only
%SR178-179
Removable Media Total Space (32-Bit
DINT)
Read Only Read Only
%SR180 Reserved
%SR181 ALM_UNACK
Bits 1-16 indicate Unacknowledged
in Alarm Groups 1-16
Read Only Read Only
%SR182 ALM_ACT
Bits 1-16 indicate Active
in Alarm Groups 1-16
Read Only Read Only
%SR183 SYS_BEEP
Beep on Keypress Enable
0= Disabled
1= Enabled
0 to 1 Read / Write Read / Write
%SR184 USER_BEEP
Internal Beeper
0=OFF
1=ON
0 to 1 Read/Write Read/Write
%SR185
Screen Saver Enabled
0= Disabled
1= Enabled
NOTE: See %SR57.16
0 to 1 Read Only Read Only
%SR186 Screen Saver Time in minutes (delay) 5 to 1200 Read Only Read Only
%SR187 NET_USE Network Usage (Avg) 0 to 1000 Read Only Read Only
%SR188 Network Usage (Min) 0 to 1000 Read Only Read Only
%SR189
Maximum Net Usage of all units on the
CAN network
0 to 1000 Read Only Read Only
%SR190 NT_TX_AVG Network TX Usage % ( / 10) (Avg) 0 to 1000 Read Only Read Only
%SR191 Network TX Usage % ( / 10) (Min) 0 to 1000 Read Only Read Only
%SR192 Network TX Usage % ( / 10) (Max) 0 to 1000 Read Only Read Only
EXTENDED SYSTEM REGISTERS
%SR193 ONLINE_CHG Online Change
%SR193.1 TRUE if 2 programs in target FLASH Read Only Read Only
%SR193.2
TRUE to switch programs, FALSE when
complete
Read Only Read Only
%SR193.3
TRUE if executing program is
temporary test
Read Only Read Only
%SR193.4
TRUE during last scan of switched-from
program
Read Only Read Only