3
2
DCC
Ready
If your locomotive is not pre-fitted with
a decoder, please see Fig.6 for location
of DCC socket.
Fig.4
Fig.6
Body
Removal
1
3
2
Lubrication
1
Fig.1
Fig.5
IMPORTANT – Only apply small single drops of light machine oil to the places indicated in red in Fig.2, 3. This is best achieved by making a simple oil ‘dropper’ as illustrated in Fig.1. Insert a straightened paper clip into a cork and use a
bottle cap as a container for the oil. A small drop of oil can then be picked up by the dropper and applied in exactly the right place. Immediately wipe off any excess oil, especially from the locomotive body. Only lubricate moving parts.
Fig.3
Fig.2
Turn locomotive upside down and remove the assembly screw that holds the
Live Drawbar to the chassis, and then remove the assembly screw as shown
in Fig.4. Lower the rear end of the locomotive chassis, and slide backwards to release the
front tab from the body as illustrated in Fig.5.
Please keep the screws safe for re-assembly.
1
2
