3
2
DCC
Ready
If your locomotive is not pre-fitted with
a decoder, please see Fig.5 for location
of DCC socket in the tender
Fig.5
Tender Body Removal
1
3
2
Please Note: Due to assembly similarities the following points cover Compound, County, Hunt and Schools Class Railroad Locomotives.
1
Fig.1
Fig.4
IMPORTANT – Only apply small single drops of light machine oil to the places indicated in red in Fig.2. This is best achieved by making a simple oil ‘dropper’ as illustrated in Fig.1. Insert a straightened paper clip into a cork and use a bottle
cap as a container for the oil. A small drop of oil can then be picked up by the dropper and applied in exactly the right place. Immediately wipe off any excess oil, especially from the locomotive body. Only lubricate moving parts.
Apply one drop of oil to each of the valve gear and connecting rod
pivot points indicated in red in Fig.2, on both sides of the locomotive.
Fig.3
Apply one drop of oil to each of the axle bearings indicated in red in
Fig.3, on both sides of the locomotive.
Fig.2
ALL
tender bodies are clip fit. To remove pull body upwards to disengage from the chassis.
Please note the position of the clips as indicated in red in Fig.4.
