3
2
1
2
DCC Ready
If your locomotive is not pre-fitted with
a decoder, please see Fig.7 for location
of DCC socket.
Fig.2
Fig.1
Lubrication
IMPORTANT – Only apply small single drops of light machine oil to the places indicated in red in Fig.2. This is best achieved by making a simple oil “dropper” as illustrated in Fig.1.
Insert a straightened paper clip into a cork and use a bottle cap as a container for the oil. A small drop of oil can then be picked up by the dropper and applied in exactly the right
place. Immediately wipe off any excess oil, especially from the locomotive body. Only lubricate moving parts.
Fig.4
Fig.7
Body Removal
Turn locomotive upside down and remove screws as shown in Fig.4.
Unclip the rear of the body from the chassis as shown in fig.5.
Carefully turn locomotive the right way up. The body will lift off easily (Fig.6).
Please keep the screws safe for re-assembly.
Fig.6
Fig.5
1
3
3
