3
2
1
Lubrication
1
Fig.1
IMPORTANT – Only apply small single drops of light machine oil to the places indicated in red in Fig.2. This is best achieved by making a simple oil ‘dropper’ as illustrated in Fig.1. Insert a straightened paper clip into a cork and use a bottle
cap as a container for the oil. A small drop of oil can then be picked up by the dropper and applied in exactly the right place. Immediately wipe off any excess oil, especially from the locomotive body. Only lubricate moving parts.
Fig.4
Apply one drop of oil to each of the axle bearings indicated in red in
Fig.3.
Fig.2
DCC
Ready
If your locomotive is not pre-fitted with
a decoder, please see Fig.6 for location
of DCC socket.
Fig.3
Body Removal
Turn the locomotive upside down and remove the assembly screws as shown in Fig.3
Carefully turn the locomotive the right way up and ease the chassis down, gently
pulling in a vertical motion shown in Fig.4
Fig.6
3
2
