3
2
Body Removal continued
Fig.6
Fig.5
Fig.3
DCC READY
Fig.1
Fig.2
Accessories
To remove coupling bar, hold the locomotive upside down and push the coupling bar gently downwards to
disengage then pull out (Fig.2).
Lubrication
IMPORTANT – Only apply small single drops of light machine oil to the places indicated in red in Fig.6. This is
best achieved by making a simple oil “dropper” as illustrated in Fig.5. Insert a straightened paper clip into a cork
and use a bottle cap as a container for the oil. A small drop of oil can then be picked up by the dropper and
applied in exactly the right place. Immediately wipe off any excess oil, especially from the locomotive body.
Only lubricate moving parts.
Body Removal
Unclip body from sides and ease off by lifting upwards. When replacing the body, ensure that it is clipped securely
back into place.
Fig.4
1
2
3
