3
2
1
Lubrication
1
1
Body Removal/ Assembly
2
Fig.1
IMPORTANT – Only apply small single drops of light machine oil to the places
indicated in red in Figs.2 and 3.
This is best achieved by making a simple oil ‘dropper’ as illustrated in Fig.1. Insert
a straightened paper clip into a cork and use a bottle cap as a container for the
oil. A small drop of oil can then be picked up by the dropper and applied in
exactly the right place. Immediately wipe off any excess oil, especially from the
locomotive body. Only lubricate moving parts.
Remove Electric Train Heat Supply
(ETHS) from both ends of body as
indicated in red in Fig.4.
Unclip sides from chassis as shown in
Fig.4 and carefully lift body clear.
Ensure that both ends of the body are
kept equally level when lifting – pulling
the body up from one end only may
cause damage.
Accessories
3
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
Fig.7
Fig.8
Fig.9
Fig.10
Fig.11
Fig.5
Fig.12
Fig.13
Replace body and clip
back into position.
Re-assemble ETHS to
both ends of body as
indicated in red in
Fig.5.
EITHER
OR
AND/OR
AND/OR
Working Louvres
Use tool provided
4
Position of Body Clips
Fig.4
4
Sound / DCC Ready
Location of Sound/DCC (Fig.12)
and DCC sockets (Fig.13)
