2
3
DCC
Ready
If your locomotive is not pre-fitted with
a decoder, please see Fig.5 for location
of DCC socket.
Fig.2
Fig.1
Lubrication
IMPORTANT – Only apply small single drops of light machine oil to the places indicated in red in Fig.2. This is best achieved by making a simple oil ‘dropper’ as illustrated in Fig.1.
Insert a straightened paper clip into a cork and use a bottle cap as a container for the oil. A small drop of oil can then be picked up by the dropper and applied in exactly the right
place. Immediately wipe off any excess oil, especially from the locomotive body. Only lubricate moving parts.
Fig.3
Fig.4
Body
Removal
Fig.5
1
3
2
Unclip the body sides from the chassis
(Fig.3), making sure all the lugs are free
from the holes in the body as indicated in
red in Fig.4. The body will lift off easily
(Fig.4).
