23
Control panel Elektro-Heizlüfter 15000 Watt
The control panel consists of two dials:
Left: mode selector dial with 5 positions.
-
O or off
-
fan only
-
5000W power (low)
-
10000W power (average)
-
15000W power (high)
Right: continuously adjustable thermostat dial.
On the control panel of the Elektro-Heizlüfter 9000 and 15000 there is also the reset point
(see Safety features).
Location and Connection
•
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your
vendor for inspection or replacement.
•
Select a suitable location for the device taking into account all the aforementioned
warnings in this manual.
•
Make sure the heater is switched off (switch to O position), then plug into a correctly
functioning 400V-50Hz socket. Only connect the heater to an earthed socket!
Set-up and Operation
If the heater is being used for the first time (or if you want to reset the desired temperature),
turn the thermostat dial to the maximum position (clockwise as far as it goes).
With the mode selector dial, adjust the heater to suit your preferences: fan only, low power
(average power) or high power. Once the temperature in the area being heated has reached
the right level, slowly turn the thermostat dial anticlockwise until you hear a soft click; leave
the dial in that position. The heater will automatically maintain the temperature at this level. It
does this by switching the heating elements off and on when the temperature rises or falls too
much. If so desired, you can now switch to a lower power level.
