3
4
Key Lock
AC Power
The RAPiD
®
Safe is designed to be powered by either the AC power supply or
four AAA batteries.
To connect the AC power supply, plug the power cord into the jack on the
back of the safe.
Open Safe with Key
The RAPiD
®
Safe includes two
barrel keys that will open the safe
when inserted into the lock on the
back panel of the RAPiD® Safe
and turned clockwise.
NOTE:
Store keys in a secure
location outside of the safe.
RAPiD
®
Safe Setup and Operation
Congratulations on purchasing the technologically advanced RAPiD
®
Safe Night Guard
™
.
You have taken a significant step in securing the safety of your firearms.
To achieve the best experience with your RAPiD
®
Safe, please read all instructions
carefully, and understand its operation.
After the RAPiD
®
Safe has been taken out of the box, please check to be sure both
circular barrel keys fit and unlock your RAPiD
®
Safe. Contact Hornady
®
at 800-338-3220
if the keys do not work. Store keys in a secure location outside the safe.
Battery Power Mode
When the RAPiD
®
Safe is unplugged, and is operating on battery power,
you must press any
button on the keypad to activate the reader.
Pressing any button on the keypad causes the system to go from battery saving mode to
ready status.
For example:
To open your safe with an RFID tag, while the system is running on battery
power, first press any
button on the keypad to bring it to ready status. Place your RFID tag
within 1" of the center of the clock display to open the safe.
Batteries
To install batteries, press the bottom
right
corner of the battery cover on the front of the safe.
Insert four (4) high quality AAA batteries according to the diagram. Replace all batteries at
the same time.
To check battery level:
1. Disconnect from AC power source.
2. Press and release “H” button on
the keypad.
3. The LED light on the “H” button will flash.
a. Flashing Green – Good battery
b. Flashing Yellow – Low battery
c. Flashing Red – Dead battery
4. After 10 seconds the safe will return to
normal operation.
NOTE:
Replace batteries every twelve
months or as needed.
RFID Reader Area
“H” Button & Key Pad
FPO
Press Here to Open
right
or
left?
Keypad Tones On/Off
With the door open and unlocked, press and hold the “H” button on the keypad for 5 seconds
until the light turns off to toggle sound on and off.
