background image

GENERAL SAFETY INSTRUCTIONS

Read this chapter with utmost care. Exact knowledge of the described dangerous situations during the operation of the machine

and of the instructions for proper usage is indispensable to avoid injuries of persons and animals as well as damage to property.

IMPORTANT:

 This log splitter exclusively serves for splitting logs, whose dimensions must correspond to the recommendations given 

herein. Any other use shall be considered improper, and the manufacturer will not be liable to any consequential injuries of persons or 

animals as well as to any damage to property as a result of improper usage of this machine.

The user must be within the specified working area and must use both hands to actuate the control device. Under no

circumstances must the user employ any other systems. Any other persons or animals, with the exception of the user, must keep

a safety distance of 5 m around this log splitter while it is in use. Check the ground on which you intend to work for stability and firm 

hold. This log splitter may only be used with its protective facilities properly installed. Disregarding the instructions given in

this chapter can result in severe consequential personal injuries or damage to property or to this machine itself.

     1. 

Only one person is allowed to work on this machine.

     2. 

No one may use this log splitter without having read its User‘s Guide before, or without having been instructed on the rules

 

for proper and safe machine usage.

     3.      The operator must be at least 18 years old. Trainees at a minimum age of 16 years may only work on this machine under  

 

supervision.

     4.      Never wear any jewellery (rings, necklaces, watches, etc.) or wide clothes such as oversized overalls, gloves or shoes as  

 

these could be caught by moving parts. Specific protective clothing such as safety shoes and special gloves are mandatory.  

 

Always wear a hair net if you have longer or long hair.

     5.      Always wear safety goggles. Bear in mind that normal glasses do not offer sufficient protection as they can even cause more  

 

severe injuries as a result of glass breakage.

     6.      Always use this log splitter on dry, level and unfrozen ground. If you use this log splitter outdoors on a lawn make sure that the  

 

grass has been cut short.

     7.      Ensure good footing so that you can keep your balance. Never stand on your log splitter. Ensure that the log splitter is firmly  

 

placed on the ground so that it cannot fall over. This can avoid serious injuries.

     8.      Stay sufficiently away from the splitting blade to avoid injuries caused by chips and splinters coming off.

     9.      Keep any other persons away. Any other persons, children or animals, with the exception of the user, must keep a safety dis- 

 

tance of 5 m around this log splitter while it is in use.

   10.    Make sure whether you have removed any foreign bodies from the log you want to split to prevent them from coming off

 

during splitting and cause damage to this machine

   11.    Never split any logs which contain nails, cables or dangerous foreign substances. Make sure that always both ends of the

 

log you are just processing are split as square as possible. This is the only way to guarantee that the log will not be forced out  

 

of its vertical position, while branches must have been cut off flush.

   12.    Never split any logs, whose dimensions are bigger than those specified under „Size of Logs“. Otherwise, injuries or irreparable  

 

damage to the machine will be the result.

   13.    Split the logs along the grain. Never place a log on this splitter crosswise to split it this way. This could result in injuries and  

 

damage to the machine.

   14.    Never pile up the logs in order to process several logs at the same time. Parts of the wood could be flung off into the air and  

 

hit you.

   15.    ONLY use your hands to operate the levers. Never use your feet, knees, a rope or similar means to operate the levers.

 

Continuously concentrate on the movements of the splitting blade. Never try to load the log splitter while its splitting blade

 

is in motion. Do not put your hands in the vicinity of the moving parts of this machine.

   16.    Protect your hands. Never bring your hands in the vicinity of any gaps opening in the log as these may close in a matter of  

 

seconds and crush or even cut off your hands. Do not remove any jammed parts of a log with your hands. When the

 

splitting blade of the log splitter is returning keep your hands off the machine, as this log splitter has been designed so that

 

it will automatically stop once the cylinder has fully retracted.

   17.    Do not run this log splitter under full load for more than 5 seconds by keeping the cylinder pressed, for example, or if you want  

 

to split a hard log. This would result in quick overheating of the pressurized oil causing consequential damage to the

 

machine. It is advisable to turn the log 90° and to try to split it at this position. If it is still impossible to split such log please

 

dispose of it instead of subjecting it to any further splitting process to avoid damage to the machine.

   18.    Do not press the splitting blade against the log. You could cause breakage of the blade or damage to the column.

   19.    Do not use the log splitter under any circumstances when you are under the influence of alcohol, drugs or medications, or if  

 

you are tired.

   20.    This machine must never be used in damp or potentially explosive areas. Never use this machine in rooms containing aggres- 

 

sive vapours (natural gas, petrol vapours or inflammable vapours).

   21.    ever smoke while you are working on this machine and make sure that there are no open fire sources or oil tanks in the

 

vicinity of your working area. DANGER – EXPLOSION HAZARD.

   22.    Check whether your power supply circuit is efficiently fused and conforms with the properties of the motor. Conformity with the  

 

power rating, the voltage and the frequency (refer to the values indicated on the type label), earthing and a standard voltage  

 

transformer connected in series are indispensable.

Fig. 10

CAUTION

: ACCUMULATED LOG PARTS AND WOOD CHIPS ARE SOURCES OF DANGER. ALWAYS KEEP YOUR

SURROUNDING AREA CLEAN SO THAT YOU CANNOT SLIP.

CAUTION:

     • 

Always disconnect your power supply source from your machine before you begin to release any jammed logs.

     • 

Do not allow any other persons to assist you in releasing a jammed log.

     • 

When releasing a jammed log, never stick into your log splitter any means such as foreign objects of any kind. Please

 

do not maltreat the jammed log with your feet or with any objects either, as a sudden release of the jammed piece will cause  

 

the log pusher to give way which can lead to personal injuries or damage to your machine, respectively.

     • 

All safety rules contained in the „General Safety Instructions“ chapter shall apply to any of the interventions described

 

before. The manufacturer will not be liable to any injuries of persons or animals or to damage to property as a result of impro- 

 

per use of this machine or of non-observance of the safety regulations.

MAINTENANCE AND CARE

Maintain your log splitter carefully. Clean the machine after each use. To guarantee the best possible and safest performance

keep your log splitter clean. Lubricate the machine according to the instructions. Check all seals, pipes and couplings for leakage be-

fore you start your log splitter. Keep the operating levers and the mains switch clean, dry and free of oil or grease.

Cleaning the Log Splitter

     1. 

Unplug the power cord.

     2. 

Use a moist cloth to clean the plastic parts. Do not use any cleaning agents, solvents or pointed objects.

     3. 

Use a soft brush to remove dust deposits from the motor ventilation slots and from moving parts at regular intervals.

     4. 

Apply some oil to all moving parts at regular intervals.

Hydraulic Oil Change

IMPORTANT

: The oil tank is factory-filled with high-grade viscosity class 20 hydraulic oil. Take waste oil to a public receiving depot or 

observe the relevant disposal regulations of your country where this log splitter is used. Do not dispose of the oil into sewerage sys-

tems, into the soil or into water bodies of any kind.

The hydraulic system is a closed system consisting of an oil tank, an oil pump and of control valves. Too low an oil level can damage 

the pump. The oil level should not be lower than 1 – 2 cm above the lower surface of the oil tank.

Change the oil completely once per year.

     • 

Ensure that no foreign particles will get into the oil tank.

     • 

Properly dispose of the waste oil after each oil change.

     • 

Allow your log splitter to run idle for a few minutes after each oil change before you place it into operation again.

The following oil grades are suitable for this log splitter:

 

 

SHELL Tellus 22

 

MOBIL DTE 11

 

ARAL Vitam GF 22

 

BP Energol HLP-HM 22

6

11

Summary of Contents for Log Splitter

















Reviews: