Horizon Signal SQ3TS, User Manual, Page: 21 / 34

21
Compatibility Operation
Multi-Signal 2.0 controllers can be used in conjunction with previous generation Multi-Signal 1.0 controllers in
Compatibility Operation. When operating in this mode, all controllers are limited to the capabilities of the MS 1.0 system.
Follow the steps below to enter Compatibility Mode:
1. With the MS 2.0 controller powered OFF, flip the Operation
Selector Switch to the right position to select Compatibility
Operation.
2. Power MS 2.0 controller back ON.
3. To use MS 2.0 Programmer:
Plug in the Programmer. When the Horizon Signal Logo Screen appears,
press R and E at the same time. The title heading of the screen will change
to say “Compatibility” and the software version. (Press R+E again to go
back to Enhanced Mode for systems with exclusively MS 2.0 controllers).
To use MS 1.0 Micro-Terminal:
MS 1.0 Micro-Terminals may be used on MS 2.0 controllers operating in
Compatibilty Mode. There is no need to change the mode of the Micro-
Terminal.
Compatibility 4.0.31
TECHNOLOGIES
SIGNAL
horizon
Configure Radio
Read: ---
Radio Type Slave
Channel 11
Baudrate 19200
Read
4. Systems running in Compatibility Operation must have all radios set to
a Baudrate of 19200. (Enhanced Mode must be set to 57600). Follow the
steps on Page 12 to set radio parameters.
Note: the radio “Read” function is still available in Compatibiltiy Operation.
5. You can now enter a program as normal. Keep in mind that you are limited to the features and functions of the
previous generation operating system while in Compatibility Operation.
To return to Enhanced Operation, make sure to flip the Operation Selector Switch back to the UP position, and
confirm that your Programmer is not in Terminal Mode (step 3 above). You will also need to adjust your radio
Baudrate back to 57600.