3. Specifications
Parameter Value
Units
Storage Temp
-65 to 105
Degrees Celsius
VDD
2.4 to 3.6
Volts
Receive Sensitivity
-95
dBm
Transmit power (conducted)
18
dBm MAX
Transmit power (radiated)
20
dBm MAX
Idle current
1
mA
Receive current
22
mA
Transmit current
50
mA
5. Module User Requirements
5.1 This module must be integrated into a device where the user cannot access the
antenna connector.
5.2 Only a 2dBi antenna can be used with this module. The antenna must meet and not
exceed the gain and pattern of the supplied Inpaq DAM00BM11500209 folded dipole
antenna.
5.3 The device must contain the following permanent labeling on the exterior of the
device as follows:
Contains FCC ID: BRWDAMTX11
5.4 The user manual of the device must contain the following paragraph:
FCC Information
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.