11
EN
Float installation (Optional)
Slat Installation (Optional)
Landing Gear Removal
1.
Carefully place the aircraft on its back.
2.
Remove the 4 screws and 2 plates securing
the landing gear.
3.
Remove the other 4 screws and 2 plates for
the rear float mount. Save all screws and
plates for the float installlation.
4.
Remove the landing gear.
Float Installation
1.
Install the included rear float wire onto the
floats.
2.
Install the floats as shown.
3.
Install the 6 screws and 4 plates removed
above.
Required Adhesives:
Foam Safe CA
1.
Apply a small drop of foam safe CA to each
mount.
2.
Carefully mount the slat onto the wing with
the rounded edge facing forward.
