background image

19

EN

Compliance Information for the European Union

EU Compliance Statement:

 Horizon Hobby, LLC  hereby declares that this product  is in compliance with 

the essential requirements and other relevant provisions of the R&TTE and EMC Directive.  

A copy of the EU Declaration of Conformity is available online at: 
http://www.horizonhobby.com/content/support-render-compliance.

Warranty and Service Information

Instructions for disposal of WEEE by users in the European Union

This product must not be disposed of with other waste. Instead, it is the user’s responsibility 
to dispose of their waste equipment by handing it over to a designated collections point for the 
recycling of waste electrical and electronic equipment. The separate collection and recycling 
of your waste equipment at the time of disposal will help to conserve natural resources and 
ensure that it is recycled in a manner that protects human health and the environment. For more 
information about where you can drop off your waste equipment for recycling, please contact 

your local city offi ce, your household waste disposal service or where you purchased the product.

Country of Purchase

Horizon Hobby

Phone Number/Email Address

Address

United States of 

America

Horizon Service Center

(Repairs and Repair Requests)  

servicecenter.horizonhobby.

com/RequestForm/

4105 Fieldstone Rd 

Champaign, Illinois, 61822 

USA

Horizon Product Support

(Product Technical Assistance)

www.quickbase.com/db/

bghj7ey8c?a=GenNewRecord

888-959-2305

Sales

[email protected]

888-959-2305

United Kingdom

Service/Parts/Sales:

Horizon Hobby Limited

[email protected]

Units 1–4 , Ployters Rd, 

Staple Tye Harlow, Essex, 

CM18 7NS, United Kingdom

+44 (0) 1279 641 097

Germany

Horizon Technischer 

Service

[email protected]

Christian-Junge-Straße 1

25337 Elmshorn, Germany

Sales: Horizon Hobby 

GmbH

+49 (0) 4121 2655 100

France

Service/Parts/Sales:

Horizon Hobby SAS

infofrance@horizonhobby.

com

11 Rue Georges Charpak

77127 Lieusaint, France

+33 (0) 1 60 18 34 90

China

Service/Parts/Sales: 

Horizon Hobby – China

[email protected]

Room 506, 

No. 97 Changshou Rd.

Shanghai, China 200060

+86 (021) 5180 9868

ICC Information

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the 
following two conditions: (1) this device may not cause interference, and (2) this device must accept any 
interference, including interference that may cause undesired operation of the device.

FCC Information

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

CAUTION:

 Changes or modifi cations not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

This product contains a radio transmitter with wireless technology which has been tested and found to 
be compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz 
frequency range.

Summary of Contents for UMX FPV RADIAN























Reviews: