7
EN
Control Direction Tests
Aircraft
movement
AS3X Reaction
1. Flip the Gear Switch to put
aircraft into SAFE mode.
2. Fully lower the throttle.
3. Move the entire aircraft
as shown and ensure the
control surfaces move in
the direction indicated in
the graphic. If the control
surfaces do not respond as
shown, do not fly the aircraft.
Refer to the receiver manual
for more information.
Once the AS3X system is active,
control surfaces may move
rapidly. This is normal. AS3X
is active until the battery is
disconnected.
Elev
ator
Aileron
Rudder
Traditional Control Direction Test
You should bind your aircraft and transmitter before doing these tests.
Move the controls on the transmitter to make sure the aircraft control surfaces move correctly and in the
proper direction. Make sure the tail linkages move freely and that paint or decals are not adhered to them.
AS3X
®
/SAFE
®
Control Direction Test
This test is meant to check that the AS3X
®
system is functioning properly.
