EPA settings
To separately adjust the movement of steering turns left and right, and the movement of throttle
trigger goes forward and backward.
Setting method:
Step 1: Power the transmitter on while holding the steering wheel full right and holding the
trigger at full
throttle brake
.
Step 2: The power LED rapidly flash 4 times then turn off to indicate the transmitter is in end
point adjustment mode.
Step 3:
1,Turn and hold the steering wheel full left, click or holding the button A (Increase) or button
B(decrease) to set up the EPA for turning left. When LED flash once indicates the default increase
or decrease 1.
2,Turn and hold the steering wheel full right, click or holding the button A (Increase) or button
B(decrease) to set up the EPA for turning left. When LED flash once indicates the default increase
or decrease 1.
3, Hold the trigger at full throttle.click or holding the button A (Increase) or button B(decrease) to
set up the EPA for
throttle turning left
. When LED flash once indicates the default increase or
decrease 1.
4,Hold the trigger at full brake.click or holding the button A (Increase) or button B(decrease) to
set up the EPA for
brake turning left
. When LED flash once indicates the default increase or
decrease 1.
Notice:
after setting is done, wait for 5S to ensure that the parameters are saved then turn off
the transmitter.
Factory reset mode
After factory parameters are reset, EPA and calibration data are reset to factory settings.
Operation steps:
Step 1: Power on the transmitter while holding the steering wheel to full left and the trigger to
full brake.
Step 2: The power LED rapidly flash 4 times then turn off to indicate the transmitter is in factory
reset mode.
Step 3: Please release the throttle trigger and steering wheel, the LED keeps on to indicate it’s
done.