EN
6
Installing the AS3X Application
1.
Download the AS3X PC software from SpektrumRC.com
2.
Connect the interface cable (SPMA3065 sold separately) to the Alpha-6
Stability System and computer via USB.
3.
Power on the transmitter and Spektrum Alpha-6 Stability System.
4.
Open the AS3X PC software on your PC or laptop.
5.
Use the AS3X PC software to program the Alpha-6 Stability System.
6.
Press “Update” in the application to save the Alpha-6 programming.
Calibration Mode
IMPORTANT:
Perform calibration with the transmitter set to high rates and
any mixes for flaperon, crow or flap set to off.
11. Ensure the main LED is blinking Blue. Repeat the above steps until the
LED blinks Blue.
12. Move the transmitter sticks through the full range of travel and then
return to center.
13. Cycle the gain inputs and return to center.
14. If calibration is incomplete, The main LED will blink Blue. Repeat steps
12–14 until calibration is complete.
15. If calibration is complete, the main LED will glow Blue solid.
16. Hold the program button to exit calibration, the main LED will glow
Green.
The Alpha-6 Stability System will now be active as soon as the system is powered
up. No further calibration or setup is required.
