Owners Manual • Bedienungsanleitung • Manuel de l’utilisateur • Manuale dell’utente
Horizon Harbor
Horizon Harbor
Optional Cannon Pump
Optional Cannon Pump
™
™
Use the existing mount to install the water cannon pump into
the hull.
1.
Remove the water inlet cap from the water pickup
silicone tube.
2.
Place the water pump and bracket into the hull, lining up
the two screw holes inside with the motor facing forward.
3.
Tighten the two screws that hold the water pump in
place, and install the rear facing silicone line to the water
pickup.
4.
Plug the long main cabin waterline into the outlet on the
left side of the pump.
5.
Attach the water pump controller to the side of the ballast
box using the included double-sided foam tape.
6.
Plug the controller servo wire into the 2-in-1 receiver/ESC
third channel port.
7.
Install the Y power harness into the ESC power wires.
This powers the boat and water pump from your selected
battery.
Optional Water Cannon Pump
EN
D/R
TRIM
D/R
TRIM
ST
TH
0
1
2
3
4
1
2
3
4
0
1
2
3
4
1
2
3
4
MIN
MAX
2
3
4
5
6
MIN
MAX
2
3
4
5
6
OFF
ON
2.4GHz
N
R
ST
N
R
TH
To operate the water pump, press the CH 3 button
on the transmitter.
The pump shuts off when you release the button.
