EN
Control Horn and Servo Arm Settings
The table to the right shows the factory settings for the control horns and servo
arms. Fly the aircraft at factory settings before making changes.
NOTICE:
If control throws are changed from the factory settings, the AR636
gain values may need to be adjusted. Refer to the Spektrum AR636 manual for
adjustment of gain values.
After fl ying, you may choose to adjust the linkage positions for the desired
control response. See the table to the right.
Horns
Arms
Elevator
Ailerons
Flaps
Rudder
More control throw
Less control throw
SAFE
®
Select Switch Designation
SAFE
®
Select technology can be easily assigned to any open switch on your
transmitter. With this new feature, you now have the fl exibility to enable or dis-
able the technology while in fl ight.
IMPORTANT:
Before assigning your desired switch, ensure that the travel for
that channel is set at 100%.
Assigning a switch
1. Bind the aircraft correctly to activate SAFE Select. This will allow the
system to be assigned to a switch.
2. Hold both transmitter sticks to the inside bottom corners and toggle the
desired switch 5 times to assign that switch. The control surfaces of the
aircraft will move, indicating the switch has been selected.
Repeat the process to assign a different switch if desired.
NOTICE:
SAFE Select is assignable on Channels 5–9.
Mode 1 and 2 Transmitters
x 5
9