6
7
A
Open the
HARDWARE PACK 1
B
See No.1 on the drawing, pick the console mast
which with the
CONSOLE CABLE, and connect
to the cable from
BASE FRAME, then attach this
console mast to
BASE FRAME and screw by 1 x
hardware assembly
(Z01+Z03+Z04)
C
See No.2 on the drawing, connect
CONSOLE
MAST to the BASE FRAME and screw by 1 x
hardware assembly
Refer to the assembly
process of No.2, then repeat on No.3 and No.4
ASSEMBLY
STEP 1
1
4
2
3
ASSEMBLY
STEP 2
A
Attach 2 x
WATER BOTTLE HOLDER on the both
side of
CONSOLE MAST, then put the CONSOLE
CABLE through WATER BOTTLE HOLDER in the
right side
B
Tight the
CONSOLE CABLE to CONNECTION
CABLE which is on the SHORT HANDLEBAR,
then pull the
CONNECTION CABLE until get the
CONSOLE CABLE
C
Attach
SHORT HANDLEBAR on the both side of
WATER BOTTLE HOLDER
D Open
HARDWARE PACK 2, attach BRACE
PLATE beneath the CONSOLE MAST on the
left side then screw by 1 x hardware assembly
(Z02+Z03+Z04)
E
Repeat the process C on the right side
Z01
Z03
Z04
Z02
Z03
Z04
1
DO NOT PINCH THE CABLE !!
ATTENTION
ENGLISH
ENGLISH
HZ16_AG_TT_5.0_Rev_1_A.indd 6-7
12/6/16 2:26 PM