Horizon Fitness TR3.0, Owner'S Manual

Page: 6 / 15

11 10
TABLET/READING RACK
WATER BOTTLE HOLDER
SAFETY KEY
CONSOLE MAST
RUNNING DECK / RUNNING BELT
REAR ROLLER
TENSION/ALIGNMENT BOLTS
ROLLER END CAP
SIDE RAIL
CONSOLE
TABLET/READING RACK
CONTROL PANEL & DISPLAY
WINDOWS
WATER BOTTLE HOLDER
PULSE GRIP HANDLEBARS
MOTOR COVER
ON/OFF SWITCH
POWER CORD
CAUTION WARNUNG
KEEP HANDS AND FEET AWAY
FROM THE MOVING PARTS.
HALTEN SIE HÄNDE UND FÜSSE
VON BEWEGLICHEN TEILEN FERN.
TOOLS INCLUDED:
F
6 mm L-Wrench
F
6 mm T-Wrench
PARTS INCLUDED:
F
1 Console Assembly
F
2 Console Masts
F
1 Hardware Kit
F
1 Safety Key
F
1 Bottle of Silicone Lubricant
(for 2 applications)
F
1 Power Cord
F
2 Handlebars
If you have questions or if
there are any missing parts,
contact Customer
Tech Support.
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift
treadmill from packaging until specified to do so in the assembly
instructions. You may remove the plastic wrap from console masts.
WARNING
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place
a protective covering on your floor. Take CAUTION when handling and transporting
this unit. Never open box when it is on its side. Once the banding straps have been
removed, do not lift or transport this unit unless it is fully assembled and in the
upright folded position, with the lock latch secure. Unpack and assemble the unit
where it will be used. The enclosed treadmill is equipped with high-pressure shocks
and may spring open if mishandled. Never grab hold of any portion of the incline
frame and attempt to lift or move the treadmill.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
WARNING
NEED HELP?
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
PRE ASSEMBLY
HANDLEBAR
TRANSPORT WHEEL