2. Operation Procedure
14
Cross Fold
2-3 Cross Fold
NOTE
- In case of cross fold, sheet wider than
210 mm (8.5") may not be folded
completely.
- Please use cross folding guide (op-
tion).
ATTENTION
- Cross fold or 12-page letter fold can
be performed only by thin fine quality
paper which is 64 gsm or lighter.
(Meaning of Cross Fold)
Sheet is folded into half, and then this
single folded sheet (signature) is
folded once again in half.
When folded sheet is opened, each
crease of this signature become criss-
cross pattern.
The following steps are to fold A3 size sheet
without cross folding guide.
1.
Fold A3 size sheet in single fold with
referring to "2-1 Operation Procedure"
(Page 8 to 11).
2.
Press fold edge of sheet firmly.
NOTE
If fold edge of sheet is not pressed
sufficiently, sheet (signature) will not
be folded correctly.
3.
Perform step 1 through 4 in "2-1 Opera-
tion Procedure" (Page 8) and pile sheets
on feed tray so that fold edge faces to
near side.
NOTE
Do not pile sheet more than half height
of feed guide. If folded sheet is piled
too much on feed tray at once, sheet is
not fed straightly.
Folded Line
Folded
Line