Horizon Fitness PAROS 2.0, Owner'S Manual

Page: 28 / 34

28
MAINTENANCE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The most important maintenance step is to simply wipe your
perspiration off the trainer after each use.
HOW DO I CLEAN MY BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your bike and its operating environment will keep maintenance problems and service callstoaminimum. For this reason,
Horizon Fitness recommends that the following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
Turn off the bike by unplugging the power cord from the wall outlet
• Wipe down the bike with a damp cloth. Never use solvents, as they can cause damage to the bike.
• Inspect the power cord. If the power cord is damaged, contact HorizonFitness.
• Make sure the power cord is not underneath the bike or in any other area where it can become pinched or cut.
NOTE:
The safety level of the equipment can be maintained only if it is examined regularly for damage and wear, e.g. connection parts. If any
deterioration is observed, immediately replace all faulty parts and do not use until it is repaired.
WEEKLY
Clean underneath the bike, following these steps:
• Turn off the bike.
• Move the bike to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the bike.
• Return the bike to its previous position.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
To remove power from the bike, the power cord must be disconnected from the wall outlet.
WARNING