manualshive.com logo in svg

Horizon Fitness HCC, Installation Instructions Manual

Share
Download
Horizon Fitness HCC Installation Instructions Manual Download Page 18

18

self-contained 

HARMONY and Symphony Plus  •  RIDE Technology

Front cover

Install front cover to ice machine.

8

➋

➊

  •  Slide ice machine cover over machine 

ensuring that tabs on back of cover 

slip under louvers on back of louvered 

docking assembly 

➊

  •  Insert and tighten two screws through 

cover and into louvered docking assembly 

➋

Water-cooled ice machines only

NOTICE

Ice machine MUST be sanitized prior to operation!

Consult Operation and Service Manual provided with ice machine for sanitizing instructions.

➋

➌

➊

 

CAUTION

•  Keep ventilation openings in the appliance enclosure 

clear of obstruction

•  To ensure proper ventilation (if not using supplied grille) 

carefully review air circulation specifications in section 
4.1

  •  Remove and discard plastic grille 

➊

  •  Apply supplied gasket material around 

entire opening on skin to prevent air 

recirculation 

➋

  •  Attach supplied metal grille to opening in 

counter door (see section 4.1) 

➌

Front cover installation – undercounter

Summary of Contents for HCC





















Reviews:

No comments

Brands by name

Popular brands

Load more brands