10
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP 4
CONSOLE MAST
BOLT (I)
SUPPORT BAR
BOLT (I)
15 mm
Qty: 4
HARDWARE BAG 4 CONTENTS :
A
Open
HARDWARE BAG 4
.
B
Align
SUPPORT BAR
with holes in
CONSOLE MASTS
.
C
Insert
BOLTS (I)
into all 4 holes of the
SUPPORT BAR
.
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
D
Tighten all console bolts (Step 3) and support bar bolts (Step 4) completely.
ASSEMBLY
STEP 3
CONSOLE MAST
ARC WASHER (L)
SPRING WASHER (M)
BOLT (K)
6mm(M8 screw)
f8.2Xf20X1.8t
T-Wrench
M8X1.25PX16L
M8
Z09
Z08
Z07
Connect the Console Cables and fix the console on the top of the
Console Masts.
4PCS
Flat Washer
Step4
1PCS
4PCS
BOLT
4PCS
Spring Washer
FLAT WASHER (B)
CONSOLE MAST
CONSOLE CABLES
SPRING WASHER (H)
BOLT (G)
CONSOLE
DO NOT ATTACH
THIS SIDE UNTIL STEP 3-D
FLAT WASHER (B)
20 mm
Qty: 4
SPRING WASHER (H)
20 mm
Qty: 4
BOLT (G)
20 mm
Qty: 4
HARDWARE BAG 3 CONTENTS :
A
Open
HARDWARE BAG 3
.
B
With running deck in lowered position, place
CONSOLE
on upright masts. Align the brackets
that are underneath the console with the top holes of the upright masts.
C
To assemble the
LEFT CONSOLE MAST
to the
CONSOLE
, insert 1
BOLT (G),
1
SPRING
WASHER (H)
and 1
FLAT WASHER (B)
into the 2 holes in the
LEFT CONSOLE MAST
and
lightly tighten.
D
Gently lift
RIGHT
side of the
CONSOLE
to connect the
CONSOLE CABLES
. Carefully tuck
wires in mast to avoid damage.
NOTE:
Do not pinch console cable or grip pulse wires.
E
Repeat
STEP C
above to attach the
RIGHT CONSOLE MAST
to the
CONSOLE
.
F
Leave console bolts loose until after step 4 is completed.
* NOTE:
Be
careful not to
pinch any
wires while
attaching the
console.
GS_1035T_Treadmill_Rev.2.3.indd 10-11
6/13/07 11:18:42 AM
