11
10
TOOLS INCLUDED:
F
6 mm T-Wrench
F
6 mm L-Wrench
PARTS INCLUDED:
F
1 Hardware Kit
F
1 Safety Key
F
1 Bottle of Silicone Lubricant
F
1 Power Cord
F
2 Covers
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift
treadmill from packaging until specified to do so in the assembly
instructions. You may remove the plastic wrap from console masts.
WARNING
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place
a protective covering on your floor. Take CAUTION when handling and transporting
this unit. Never open box when it is on its side. Once the banding straps have been
removed, do not lift or transport this unit unless it is fully assembled. Unpack and
assemble the unit where it will be used. The enclosed treadmill is equipped with
high-pressure shocks and may spring open if mishandled.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
WARNING
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
PRE
ASSEMBLY
If you have questions or if
there are any missing parts,
contact Customer
Tech Support.
NEED HELP?
TABLET/READING RACK
SAFETY KEY
CONSOLE MAST
RUNNING DECK / RUNNING BELT
REAR ROLLER
TENSION/ALIGNMENT BOLTS
ROLLER END CAP
SIDE RAIL
CONSOLE
MULTI-STORAGE AREA
CONTROL PANEL & DISPLAY
WINDOWS
PULSE GRIP HANDLEBARS
MOTOR COVER
ON/OFF SWITCH
POWER CORD
