ASSEMBL
Y
15
INTRODUCTION
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBL
Y
BEFORE YOU
BEGIN
IMPORT
ANT
PRECAUTIONS
PROPER USAGE
Your treadmill is capable of reaching high speeds. Always start off using a slower speed and adjust the speed in small
increments to reach a higher speed level. Never leave the treadmill unattended while it is running. When not in use,
remove the safety key, turn the on/off switch to off and unplug the power cord. Make sure to follow the MAINTENANCE
schedule located on page 37 in this manual. Never step onto the treadmill when it is moving more than 0.5 mph. Keep
your body and head facing forward. Do not attempt to turn around or look backwards while the treadmill is running.
Stop your workout immediately if you feel pain, faint, dizzy or are short of breath.
Do not operate the treadmill if the power cord or plug is damaged.
If the treadmill appears to not be working properly, do not use the treadmill.
FOLDING
Firmly grasp the back end of the treadmill. Carefully lift the end of the treadmill
deck into the upright position until the foot lock latch engages and securely
locks the deck into position. Make sure the deck is securely latched before
letting go. To unfold, firmly grasp the back end of the treadmill. Gently press
down on the foot lock latch with your foot until the lock latch disengages.
Carefully lower the deck to the ground.
MOVING - 1.2T
Your treadmill has a pair of transport wheels built into the frame. To move, make
sure the treadmill is folded and securely latched. Then firmly grasp the handlebars,
tilt the treadmill back and roll.
MOVING - 2.2T-5.2T
Your treadmill has 4 transport wheels built into the frame. To move, make sure
the treadmill is folded and securely latched. To unlock wheels, push down on the
top lever of all 4 wheel locks located on the corners of the base frame. Then firmly
grasp the handlebars, and slowly move the treadmill. After moving to the desired
location, push down on the bottom lever of all 4 wheel locks.
NOTE:
All 4 wheels MUST be locked before using the treadmill.
Our Treadmills are heavy, use care and additional help if necessary when moving. Do
not attempt to move or transport treadmill unless it is in the upright, folded position
with the lock latch secured. Failure to follow these instructions could result in injury.
WARNING
WARNING
WHEEL LOCKS
LEVELING
The treadmill should be level for optimum use. Once you have placed the treadmill
where you intend to use it, raise or lower the adjustable levelers located on the
treadmill base frame. Once you have leveled the treadmill, lock the levelers in place
by tightening the nuts against the frame.
NOTE:
1.2T leveling not needed (there are no levelers).
